LABTHINK INSTRUMENTS CO. LTD.
Peel Adhesion Test

Peel Adhesion Test

Send Inquiry
XLW(B) Peel Adhesion Testis a basic type to measure physical force of plastic films, textiles, adhesive tapes and etc. It can be used for tensile strength and elongation, peeling force, seal strength test and so on.

Principle:

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and the ruler shown on the stand column. The tensile strength, tear strength and elongation rate can be obtained by further calculation.

Standards:

GB/T 4850-2002, GB8808, GB/T 1040.3-2006, GB/T17200, GB/T2790, GB/T2791, GB/T2792, QB/T2358

Features:

  • 1% of full scale effectively ensures the accuracy of test results
  • 2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users
  • 3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available
  • Elongation rate can be easily obtained by the precise ruler
  • Different test range of load cells and 7 distinct test speeds to meet different test requirements

Specifications

XLW (B) Peel Adhesion Test

Load Cell Capacity

200 N (30 N, 50 N and 100 N are optional)

Accuracy

1% FS

Test Speed

50, 100, 150, 200, 250, 300, 500 mm/min

Number of Specimens

1

Specimen Width

30 mm (Standard Grip)

50 mm (Optional Grip)

Sample Clamp

Manual Specimen Clamp

Stroke

600 mm

Instrument Dimension

450 mm (L) x 580 mm (W) x 1100 mm (H)

Power Supply

AC 220V 50Hz

Net Weight

61 kg

Applications:

1. Shearing Test
2. Test of Tensile Strength and Elongation Rate
3. Test of Tensile Strength at Break
4. Tear Resistance Test
5. Heat Seal Strength Test
6. 90 Degree Peel Test
7. 180 Degree Peel Test