LABTHINK INSTRUMENTS CO. LTD.
Bonding Force Tester

Bonding Force Tester

Send Inquiry

 XLW(M)  Bonding Force Tester

Principle

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation.

Specifications



Load Cell Capacity100 N, 200 N, 500 N (one of them is available)
Accuracy1% FS
Test Speed50, 100, 150, 200, 250, 300, 500 mm/min
Number of Specimens1
Specimen Width30 mm (Standard Grip)
50 mm (Optional Grip)
Clamping WayPneumatic Specimen Clamp
Stroke600 mm
Pressure of Gas Supply0.5 MPa~0.7 MPa (outside of supply scope)
Port Size4 mm PU Tubing
Instrument Dimension450 mm (L) x 580 mm (W) x 1100 mm (H)
Power SupplyAC 220V 50Hz
Net Weight60 kg